Home
About Us
Products
Project
Service
Blog
Contact Us

NEWS

Committed to the production of conveying machinery research and development

Home page

Use and Maintenance Management of Roller Conveyor

2024-05-22

As an important material handling equipment, roller conveyor is widely used in various industrial fields.

Use and Maintenance Management of Roller Conveyor

As an important material handling equipment, roller conveyor is widely used in various industrial fields. In order to ensure its efficient and stable operation, its use and maintenance management is particularly important.

Precautions for the use of 1.

1. Before use, ensure that all parts of the roller conveyor are intact, such as rollers, bearings, chains, etc.

2. When starting, it should be accelerated gradually to avoid sudden acceleration and impact on the equipment.

3. When conveying materials, avoid overload operation, ensure uniform distribution of materials, and prevent partial load.

4. Regularly check the tension of the conveyor belt to ensure that it is in the best condition.

Key points of 2. maintenance management

1. Daily inspection: check whether the rollers of the roller conveyor rotate flexibly, whether the bearing has abnormal sound, whether the chain is loose, etc.

2. Weekly maintenance: clean the dust on the surface and inside the equipment, check the fastening of the fasteners to ensure that there is no looseness.

3. Monthly inspection: check the wear of the conveyor belt, such as serious wear and tear to be replaced in time. Check the running state of the motor, reducer and other driving parts to ensure normal operation.

4. Regularly check the wear of the roller. If there is excessive wear, replace the roller in time.

Lubricating oil management: According to the equipment requirements, replace the lubricating oil regularly to ensure the normal operation of the lubrication system.

3. safety management

1. Operators should be professionally trained and familiar with the performance and operation requirements of the equipment.

2. When the equipment is running, it is forbidden to touch the rotating parts to avoid safety accidents.

3. Regularly check the electrical part of the equipment to ensure electrical safety.

4. It is forbidden to pile up sundries around the equipment and keep the working environment clean and tidy.

4. fault handling

1. If the equipment fails, stop running immediately and find out the cause of the failure.

2. For faults that cannot be handled by oneself, professional maintenance personnel should be contacted in time for handling.

In short, the use and maintenance management of roller conveyors involves many aspects, including precautions for use, maintenance management points, safety management and fault handling. Only by doing a good job in these aspects can we ensure the stable operation of the roller conveyor and improve its service life.

Key words:

Conveyor

Belt conveyor drive and reducer failure

Composition and characteristics of belt conveyor

Related News

Development of Conveyor at Home and Abroad

In China, the development history of the conveyor can be traced back to the last century. With the process of industrialization, conveyor technology has been rapid development.

2024-05-22

Belt conveyor drive and reducer failure

Belt conveyor plays an important role in the industrial field, in which the driving device and reducer are the core components, which are responsible for the power transmission and speed adjustment of the conveyor belt.

2024-05-22