Home
About Us
Products
Project
Service
Blog
Contact Us

NEWS

Committed to the production of conveying machinery research and development

Home page

Preparation before use of screw conveyor and requirements for foundation

2024-12-05

Equipment inspection: carefully check all parts of the screw conveyor, including screw blades, bearings, driving devices, etc., to ensure that they are intact and installed correctly.

Preparation before use of screw conveyor and requirements for foundation

Preparation before use of 1. screw conveyor

Before using a screw conveyor, there are several key preparation steps that need to be completed to ensure its safe and efficient operation.

1. Equipment inspection: carefully check all parts of the screw conveyor, including screw blades, bearings, driving devices, etc., to ensure that they are intact and installed correctly.

2. Cleaning: Clear the inside of the conveyor to ensure that there are no residues or impurities.

3. Lubrication: Lubricate bearings and other moving parts in accordance with the requirements of the equipment manual.

4. Debugging: Before starting, carry out no-load debugging to check whether the conveyor is running smoothly and whether there is abnormal noise or vibration.

2. requirements for foundation

The installation foundation of the screw conveyor is very important to the safety and stability of its operation. Here are some key requirements regarding the foundation:

1. Strength: The foundation must be able to withstand the weight of the screw conveyor and the dynamic force during operation.

2. Flatness: The surface of the foundation must be flat to ensure that the screw conveyor is installed horizontally and runs smoothly.

3. Stability: The foundation should be deep underground to ensure stability during equipment operation.

4. Shockproof: For large or high-speed screw conveyors, the shockproof performance of the foundation may need to be considered to reduce the vibration of the equipment during operation.

5. Grounding: The foundation should have good grounding performance to prevent electrostatic accumulation from causing safety hazards.

6. Reserved space: During installation, sufficient space should be reserved around the foundation to facilitate daily maintenance and repair.

In addition, the following points need to be noted:

1. Choose appropriate materials according to the working environment, such as anti-corrosion, wear-resistant, etc.

2. During the operation of the equipment, regularly check the fastening of the fasteners to prevent loosening.

3. Regular maintenance of the screw conveyor, including cleaning, lubrication, etc., to ensure its long-term stable operation.

In short, in order to ensure the normal operation of the screw conveyor and prolong the service life, adequate preparation before use and high requirements for the foundation are very important. Follow the manufacturer's instructions and recommendations, and regular maintenance and inspection can ensure the safe and efficient operation of the screw conveyor.

Key words:

Conveyor

Four Failure Forms and Causes of Rubber Roller Wear

Conveying capacity and conveying range of scraper conveyor

Related News

Development of Conveyor at Home and Abroad

In China, the development history of the conveyor can be traced back to the last century. With the process of industrialization, conveyor technology has been rapid development.

2024-05-22

Belt conveyor drive and reducer failure

Belt conveyor plays an important role in the industrial field, in which the driving device and reducer are the core components, which are responsible for the power transmission and speed adjustment of the conveyor belt.

2024-05-22